Graphite MS is a paste made on the basis of graphite and other mineral raw minerals. The specific gravity is about 1,2 kg/l.

Paste in PE-Buckets with a net weight of 25 kg.

Graphite MS is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure.
With all these techniques it is as well qualified for spraying.
In special cases Graphite MS can be added to Graphite I 75 L or T 85 in any proportion.
Thus the intended roughness of the surface and the covering power can be adjusted.
Graphite MS is also suitable for lead-free brass casting.

Graphite MS is mixed in water in the proportion of 1 to 10 and is at once ready for use.

The proportion can be changed according to the weight and thickness of the sides.
It is recommendable to keep the whole liquid in motion by appropriate device (stirring apparatus).

Bearing application:
Durability is at least 6 months.

Longer durability of the die
More castings before a cleaning of the permanent mould becomes necessary
Improvement of output and productivity through a better liquid flow of the metal
Uniform surface of the castings
Less subsequent after work of the casting
Reduce hot cracking tendency.

Responsibility of characterization:
According to the German regulations about dangerous materials this material need not be particularly characterized.
The preceding data are in accordance to our present knowledge and experiences.




Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.